Page dedicated to the evolution of my model train
-
DIY Programming on siding track with Z21 Starter
I sometimes want to program CV to one locomotive without the need to remove other locomotives from the track (POM). To avoid this, added a siding with a DPDS connected to the Z21 white. This allows to bring a loco to the siding, change the switch, program the loco and after changing the switch again…
-
Railway crossing internal circle
The internal circle railway crossing is made with the same process as the one of the external circle.
-
Railway crossing external circle
The external loop had a “dirt road” and a tunnel entrance that needed some improvement. After removing the dirt and cleaning, plaster was used to make a more leveled countryside road. Using a knife and an old wagon ensured clearance on the rails. Once the plaster is dry it is painted, ballast added to the…
