Page dedicated to the evolution of my model train
-
Forest area base and ballast
Preparation of the forest was done by cutting a wood to shame and gluing brown and light brown dirt. Ballasting was done as always but with different ballast from Noch. White dots represent placement for trees.
-
DIY Programming on siding track with Z21 Starter
I sometimes want to program CV to one locomotive without the need to remove other locomotives from the track (POM). To avoid this, added a siding with a DPDS connected to the Z21 white. This allows to bring a loco to the siding, change the switch, program the loco and after changing the switch again…
-
Railway crossing external circle
The external loop had a “dirt road” and a tunnel entrance that needed some improvement. After removing the dirt and cleaning, plaster was used to make a more leveled countryside road. Using a knife and an old wagon ensured clearance on the rails. Once the plaster is dry it is painted, ballast added to the…